simple notification daemon for wayland
Files | Log | Commits | Refs | README
Size: 27569 bytes
/* Generated by wayland-scanner 1.23.0 */
#ifndef WLR_LAYER_SHELL_UNSTABLE_V1_CLIENT_PROTOCOL_H
#define WLR_LAYER_SHELL_UNSTABLE_V1_CLIENT_PROTOCOL_H
#include <stdint.h>
#include <stddef.h>
#include "wayland-client.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @page page_wlr_layer_shell_unstable_v1 The wlr_layer_shell_unstable_v1 protocol
* @section page_ifaces_wlr_layer_shell_unstable_v1 Interfaces
* - @subpage page_iface_zwlr_layer_shell_v1 - create surfaces that are layers of the desktop
* - @subpage page_iface_zwlr_layer_surface_v1 - layer metadata interface
* @section page_copyright_wlr_layer_shell_unstable_v1 Copyright
* <pre>
*
* Copyright © 2017 Drew DeVault
*
* Permission to use, copy, modify, distribute, and sell this
* software and its documentation for any purpose is hereby granted
* without fee, provided that the above copyright notice appear in
* all copies and that both that copyright notice and this permission
* notice appear in supporting documentation, and that the name of
* the copyright holders not be used in advertising or publicity
* pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no
* representations about the suitability of this software for any
* purpose. It is provided "as is" without express or implied
* warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
* SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
* FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
* SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
* AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
* ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF
* THIS SOFTWARE.
* </pre>
*/
struct wl_output;
struct wl_surface;
struct xdg_popup;
struct zwlr_layer_shell_v1;
struct zwlr_layer_surface_v1;
#ifndef ZWLR_LAYER_SHELL_V1_INTERFACE
#define ZWLR_LAYER_SHELL_V1_INTERFACE
/**
* @page page_iface_zwlr_layer_shell_v1 zwlr_layer_shell_v1
* @section page_iface_zwlr_layer_shell_v1_desc Description
*
* Clients can use this interface to assign the surface_layer role to
* wl_surfaces. Such surfaces are assigned to a "layer" of the output and
* rendered with a defined z-depth respective to each other. They may also be
* anchored to the edges and corners of a screen and specify input handling
* semantics. This interface should be suitable for the implementation of
* many desktop shell components, and a broad number of other applications
* that interact with the desktop.
* @section page_iface_zwlr_layer_shell_v1_api API
* See @ref iface_zwlr_layer_shell_v1.
*/
/**
* @defgroup iface_zwlr_layer_shell_v1 The zwlr_layer_shell_v1 interface
*
* Clients can use this interface to assign the surface_layer role to
* wl_surfaces. Such surfaces are assigned to a "layer" of the output and
* rendered with a defined z-depth respective to each other. They may also be
* anchored to the edges and corners of a screen and specify input handling
* semantics. This interface should be suitable for the implementation of
* many desktop shell components, and a broad number of other applications
* that interact with the desktop.
*/
extern const struct wl_interface zwlr_layer_shell_v1_interface;
#endif
#ifndef ZWLR_LAYER_SURFACE_V1_INTERFACE
#define ZWLR_LAYER_SURFACE_V1_INTERFACE
/**
* @page page_iface_zwlr_layer_surface_v1 zwlr_layer_surface_v1
* @section page_iface_zwlr_layer_surface_v1_desc Description
*
* An interface that may be implemented by a wl_surface, for surfaces that
* are designed to be rendered as a layer of a stacked desktop-like
* environment.
*
* Layer surface state (layer, size, anchor, exclusive zone,
* margin, interactivity) is double-buffered, and will be applied at the
* time wl_surface.commit of the corresponding wl_surface is called.
*
* Attaching a null buffer to a layer surface unmaps it.
*
* Unmapping a layer_surface means that the surface cannot be shown by the
* compositor until it is explicitly mapped again. The layer_surface
* returns to the state it had right after layer_shell.get_layer_surface.
* The client can re-map the surface by performing a commit without any
* buffer attached, waiting for a configure event and handling it as usual.
* @section page_iface_zwlr_layer_surface_v1_api API
* See @ref iface_zwlr_layer_surface_v1.
*/
/**
* @defgroup iface_zwlr_layer_surface_v1 The zwlr_layer_surface_v1 interface
*
* An interface that may be implemented by a wl_surface, for surfaces that
* are designed to be rendered as a layer of a stacked desktop-like
* environment.
*
* Layer surface state (layer, size, anchor, exclusive zone,
* margin, interactivity) is double-buffered, and will be applied at the
* time wl_surface.commit of the corresponding wl_surface is called.
*
* Attaching a null buffer to a layer surface unmaps it.
*
* Unmapping a layer_surface means that the surface cannot be shown by the
* compositor until it is explicitly mapped again. The layer_surface
* returns to the state it had right after layer_shell.get_layer_surface.
* The client can re-map the surface by performing a commit without any
* buffer attached, waiting for a configure event and handling it as usual.
*/
extern const struct wl_interface zwlr_layer_surface_v1_interface;
#endif
#ifndef ZWLR_LAYER_SHELL_V1_ERROR_ENUM
#define ZWLR_LAYER_SHELL_V1_ERROR_ENUM
enum zwlr_layer_shell_v1_error {
/**
* wl_surface has another role
*/
ZWLR_LAYER_SHELL_V1_ERROR_ROLE = 0,
/**
* layer value is invalid
*/
ZWLR_LAYER_SHELL_V1_ERROR_INVALID_LAYER = 1,
/**
* wl_surface has a buffer attached or committed
*/
ZWLR_LAYER_SHELL_V1_ERROR_ALREADY_CONSTRUCTED = 2,
};
#endif /* ZWLR_LAYER_SHELL_V1_ERROR_ENUM */
#ifndef ZWLR_LAYER_SHELL_V1_LAYER_ENUM
#define ZWLR_LAYER_SHELL_V1_LAYER_ENUM
/**
* @ingroup iface_zwlr_layer_shell_v1
* available layers for surfaces
*
* These values indicate which layers a surface can be rendered in. They
* are ordered by z depth, bottom-most first. Traditional shell surfaces
* will typically be rendered between the bottom and top layers.
* Fullscreen shell surfaces are typically rendered at the top layer.
* Multiple surfaces can share a single layer, and ordering within a
* single layer is undefined.
*/
enum zwlr_layer_shell_v1_layer {
ZWLR_LAYER_SHELL_V1_LAYER_BACKGROUND = 0,
ZWLR_LAYER_SHELL_V1_LAYER_BOTTOM = 1,
ZWLR_LAYER_SHELL_V1_LAYER_TOP = 2,
ZWLR_LAYER_SHELL_V1_LAYER_OVERLAY = 3,
};
#endif /* ZWLR_LAYER_SHELL_V1_LAYER_ENUM */
#define ZWLR_LAYER_SHELL_V1_GET_LAYER_SURFACE 0
#define ZWLR_LAYER_SHELL_V1_DESTROY 1
/**
* @ingroup iface_zwlr_layer_shell_v1
*/
#define ZWLR_LAYER_SHELL_V1_GET_LAYER_SURFACE_SINCE_VERSION 1
/**
* @ingroup iface_zwlr_layer_shell_v1
*/
#define ZWLR_LAYER_SHELL_V1_DESTROY_SINCE_VERSION 3
/** @ingroup iface_zwlr_layer_shell_v1 */
static inline void
zwlr_layer_shell_v1_set_user_data(struct zwlr_layer_shell_v1 *zwlr_layer_shell_v1, void *user_data)
{
wl_proxy_set_user_data((struct wl_proxy *) zwlr_layer_shell_v1, user_data);
}
/** @ingroup iface_zwlr_layer_shell_v1 */
static inline void *
zwlr_layer_shell_v1_get_user_data(struct zwlr_layer_shell_v1 *zwlr_layer_shell_v1)
{
return wl_proxy_get_user_data((struct wl_proxy *) zwlr_layer_shell_v1);
}
static inline uint32_t
zwlr_layer_shell_v1_get_version(struct zwlr_layer_shell_v1 *zwlr_layer_shell_v1)
{
return wl_proxy_get_version((struct wl_proxy *) zwlr_layer_shell_v1);
}
/**
* @ingroup iface_zwlr_layer_shell_v1
*
* Create a layer surface for an existing surface. This assigns the role of
* layer_surface, or raises a protocol error if another role is already
* assigned.
*
* Creating a layer surface from a wl_surface which has a buffer attached
* or committed is a client error, and any attempts by a client to attach
* or manipulate a buffer prior to the first layer_surface.configure call
* must also be treated as errors.
*
* After creating a layer_surface object and setting it up, the client
* must perform an initial commit without any buffer attached.
* The compositor will reply with a layer_surface.configure event.
* The client must acknowledge it and is then allowed to attach a buffer
* to map the surface.
*
* You may pass NULL for output to allow the compositor to decide which
* output to use. Generally this will be the one that the user most
* recently interacted with.
*
* Clients can specify a namespace that defines the purpose of the layer
* surface.
*/
static inline struct zwlr_layer_surface_v1 *
zwlr_layer_shell_v1_get_layer_surface(struct zwlr_layer_shell_v1 *zwlr_layer_shell_v1, struct wl_surface *surface, struct wl_output *output, uint32_t layer, const char *namespace)
{
struct wl_proxy *id;
id = wl_proxy_marshal_flags((struct wl_proxy *) zwlr_layer_shell_v1,
ZWLR_LAYER_SHELL_V1_GET_LAYER_SURFACE, &zwlr_layer_surface_v1_interface, wl_proxy_get_version((struct wl_proxy *) zwlr_layer_shell_v1), 0, NULL, surface, output, layer, namespace);
return (struct zwlr_layer_surface_v1 *) id;
}
/**
* @ingroup iface_zwlr_layer_shell_v1
*
* This request indicates that the client will not use the layer_shell
* object any more. Objects that have been created through this instance
* are not affected.
*/
static inline void
zwlr_layer_shell_v1_destroy(struct zwlr_layer_shell_v1 *zwlr_layer_shell_v1)
{
wl_proxy_marshal_flags((struct wl_proxy *) zwlr_layer_shell_v1,
ZWLR_LAYER_SHELL_V1_DESTROY, NULL, wl_proxy_get_version((struct wl_proxy *) zwlr_layer_shell_v1), WL_MARSHAL_FLAG_DESTROY);
}
#ifndef ZWLR_LAYER_SURFACE_V1_KEYBOARD_INTERACTIVITY_ENUM
#define ZWLR_LAYER_SURFACE_V1_KEYBOARD_INTERACTIVITY_ENUM
/**
* @ingroup iface_zwlr_layer_surface_v1
* types of keyboard interaction possible for a layer shell surface
*
* Types of keyboard interaction possible for layer shell surfaces. The
* rationale for this is twofold: (1) some applications are not interested
* in keyboard events and not allowing them to be focused can improve the
* desktop experience; (2) some applications will want to take exclusive
* keyboard focus.
*/
enum zwlr_layer_surface_v1_keyboard_interactivity {
/**
* no keyboard focus is possible
*
* This value indicates that this surface is not interested in
* keyboard events and the compositor should never assign it the
* keyboard focus.
*
* This is the default value, set for newly created layer shell
* surfaces.
*
* This is useful for e.g. desktop widgets that display information
* or only have interaction with non-keyboard input devices.
*/
ZWLR_LAYER_SURFACE_V1_KEYBOARD_INTERACTIVITY_NONE = 0,
/**
* request exclusive keyboard focus
*
* Request exclusive keyboard focus if this surface is above the
* shell surface layer.
*
* For the top and overlay layers, the seat will always give
* exclusive keyboard focus to the top-most layer which has
* keyboard interactivity set to exclusive. If this layer contains
* multiple surfaces with keyboard interactivity set to exclusive,
* the compositor determines the one receiving keyboard events in
* an implementation- defined manner. In this case, no guarantee is
* made when this surface will receive keyboard focus (if ever).
*
* For the bottom and background layers, the compositor is allowed
* to use normal focus semantics.
*
* This setting is mainly intended for applications that need to
* ensure they receive all keyboard events, such as a lock screen
* or a password prompt.
*/
ZWLR_LAYER_SURFACE_V1_KEYBOARD_INTERACTIVITY_EXCLUSIVE = 1,
/**
* request regular keyboard focus semantics
*
* This requests the compositor to allow this surface to be
* focused and unfocused by the user in an implementation-defined
* manner. The user should be able to unfocus this surface even
* regardless of the layer it is on.
*
* Typically, the compositor will want to use its normal mechanism
* to manage keyboard focus between layer shell surfaces with this
* setting and regular toplevels on the desktop layer (e.g. click
* to focus). Nevertheless, it is possible for a compositor to
* require a special interaction to focus or unfocus layer shell
* surfaces (e.g. requiring a click even if focus follows the mouse
* normally, or providing a keybinding to switch focus between
* layers).
*
* This setting is mainly intended for desktop shell components
* (e.g. panels) that allow keyboard interaction. Using this option
* can allow implementing a desktop shell that can be fully usable
* without the mouse.
* @since 4
*/
ZWLR_LAYER_SURFACE_V1_KEYBOARD_INTERACTIVITY_ON_DEMAND = 2,
};
/**
* @ingroup iface_zwlr_layer_surface_v1
*/
#define ZWLR_LAYER_SURFACE_V1_KEYBOARD_INTERACTIVITY_ON_DEMAND_SINCE_VERSION 4
#endif /* ZWLR_LAYER_SURFACE_V1_KEYBOARD_INTERACTIVITY_ENUM */
#ifndef ZWLR_LAYER_SURFACE_V1_ERROR_ENUM
#define ZWLR_LAYER_SURFACE_V1_ERROR_ENUM
enum zwlr_layer_surface_v1_error {
/**
* provided surface state is invalid
*/
ZWLR_LAYER_SURFACE_V1_ERROR_INVALID_SURFACE_STATE = 0,
/**
* size is invalid
*/
ZWLR_LAYER_SURFACE_V1_ERROR_INVALID_SIZE = 1,
/**
* anchor bitfield is invalid
*/
ZWLR_LAYER_SURFACE_V1_ERROR_INVALID_ANCHOR = 2,
/**
* keyboard interactivity is invalid
*/
ZWLR_LAYER_SURFACE_V1_ERROR_INVALID_KEYBOARD_INTERACTIVITY = 3,
/**
* exclusive edge is invalid given the surface anchors
*/
ZWLR_LAYER_SURFACE_V1_ERROR_INVALID_EXCLUSIVE_EDGE = 4,
};
#endif /* ZWLR_LAYER_SURFACE_V1_ERROR_ENUM */
#ifndef ZWLR_LAYER_SURFACE_V1_ANCHOR_ENUM
#define ZWLR_LAYER_SURFACE_V1_ANCHOR_ENUM
enum zwlr_layer_surface_v1_anchor {
/**
* the top edge of the anchor rectangle
*/
ZWLR_LAYER_SURFACE_V1_ANCHOR_TOP = 1,
/**
* the bottom edge of the anchor rectangle
*/
ZWLR_LAYER_SURFACE_V1_ANCHOR_BOTTOM = 2,
/**
* the left edge of the anchor rectangle
*/
ZWLR_LAYER_SURFACE_V1_ANCHOR_LEFT = 4,
/**
* the right edge of the anchor rectangle
*/
ZWLR_LAYER_SURFACE_V1_ANCHOR_RIGHT = 8,
};
#endif /* ZWLR_LAYER_SURFACE_V1_ANCHOR_ENUM */
/**
* @ingroup iface_zwlr_layer_surface_v1
* @struct zwlr_layer_surface_v1_listener
*/
struct zwlr_layer_surface_v1_listener {
/**
* suggest a surface change
*
* The configure event asks the client to resize its surface.
*
* Clients should arrange their surface for the new states, and
* then send an ack_configure request with the serial sent in this
* configure event at some point before committing the new surface.
*
* The client is free to dismiss all but the last configure event
* it received.
*
* The width and height arguments specify the size of the window in
* surface-local coordinates.
*
* The size is a hint, in the sense that the client is free to
* ignore it if it doesn't resize, pick a smaller size (to satisfy
* aspect ratio or resize in steps of NxM pixels). If the client
* picks a smaller size and is anchored to two opposite anchors
* (e.g. 'top' and 'bottom'), the surface will be centered on this
* axis.
*
* If the width or height arguments are zero, it means the client
* should decide its own window dimension.
*/
void (*configure)(void *data,
struct zwlr_layer_surface_v1 *zwlr_layer_surface_v1,
uint32_t serial,
uint32_t width,
uint32_t height);
/**
* surface should be closed
*
* The closed event is sent by the compositor when the surface
* will no longer be shown. The output may have been destroyed or
* the user may have asked for it to be removed. Further changes to
* the surface will be ignored. The client should destroy the
* resource after receiving this event, and create a new surface if
* they so choose.
*/
void (*closed)(void *data,
struct zwlr_layer_surface_v1 *zwlr_layer_surface_v1);
};
/**
* @ingroup iface_zwlr_layer_surface_v1
*/
static inline int
zwlr_layer_surface_v1_add_listener(struct zwlr_layer_surface_v1 *zwlr_layer_surface_v1,
const struct zwlr_layer_surface_v1_listener *listener, void *data)
{
return wl_proxy_add_listener((struct wl_proxy *) zwlr_layer_surface_v1,
(void (**)(void)) listener, data);
}
#define ZWLR_LAYER_SURFACE_V1_SET_SIZE 0
#define ZWLR_LAYER_SURFACE_V1_SET_ANCHOR 1
#define ZWLR_LAYER_SURFACE_V1_SET_EXCLUSIVE_ZONE 2
#define ZWLR_LAYER_SURFACE_V1_SET_MARGIN 3
#define ZWLR_LAYER_SURFACE_V1_SET_KEYBOARD_INTERACTIVITY 4
#define ZWLR_LAYER_SURFACE_V1_GET_POPUP 5
#define ZWLR_LAYER_SURFACE_V1_ACK_CONFIGURE 6
#define ZWLR_LAYER_SURFACE_V1_DESTROY 7
#define ZWLR_LAYER_SURFACE_V1_SET_LAYER 8
#define ZWLR_LAYER_SURFACE_V1_SET_EXCLUSIVE_EDGE 9
/**
* @ingroup iface_zwlr_layer_surface_v1
*/
#define ZWLR_LAYER_SURFACE_V1_CONFIGURE_SINCE_VERSION 1
/**
* @ingroup iface_zwlr_layer_surface_v1
*/
#define ZWLR_LAYER_SURFACE_V1_CLOSED_SINCE_VERSION 1
/**
* @ingroup iface_zwlr_layer_surface_v1
*/
#define ZWLR_LAYER_SURFACE_V1_SET_SIZE_SINCE_VERSION 1
/**
* @ingroup iface_zwlr_layer_surface_v1
*/
#define ZWLR_LAYER_SURFACE_V1_SET_ANCHOR_SINCE_VERSION 1
/**
* @ingroup iface_zwlr_layer_surface_v1
*/
#define ZWLR_LAYER_SURFACE_V1_SET_EXCLUSIVE_ZONE_SINCE_VERSION 1
/**
* @ingroup iface_zwlr_layer_surface_v1
*/
#define ZWLR_LAYER_SURFACE_V1_SET_MARGIN_SINCE_VERSION 1
/**
* @ingroup iface_zwlr_layer_surface_v1
*/
#define ZWLR_LAYER_SURFACE_V1_SET_KEYBOARD_INTERACTIVITY_SINCE_VERSION 1
/**
* @ingroup iface_zwlr_layer_surface_v1
*/
#define ZWLR_LAYER_SURFACE_V1_GET_POPUP_SINCE_VERSION 1
/**
* @ingroup iface_zwlr_layer_surface_v1
*/
#define ZWLR_LAYER_SURFACE_V1_ACK_CONFIGURE_SINCE_VERSION 1
/**
* @ingroup iface_zwlr_layer_surface_v1
*/
#define ZWLR_LAYER_SURFACE_V1_DESTROY_SINCE_VERSION 1
/**
* @ingroup iface_zwlr_layer_surface_v1
*/
#define ZWLR_LAYER_SURFACE_V1_SET_LAYER_SINCE_VERSION 2
/**
* @ingroup iface_zwlr_layer_surface_v1
*/
#define ZWLR_LAYER_SURFACE_V1_SET_EXCLUSIVE_EDGE_SINCE_VERSION 5
/** @ingroup iface_zwlr_layer_surface_v1 */
static inline void
zwlr_layer_surface_v1_set_user_data(struct zwlr_layer_surface_v1 *zwlr_layer_surface_v1, void *user_data)
{
wl_proxy_set_user_data((struct wl_proxy *) zwlr_layer_surface_v1, user_data);
}
/** @ingroup iface_zwlr_layer_surface_v1 */
static inline void *
zwlr_layer_surface_v1_get_user_data(struct zwlr_layer_surface_v1 *zwlr_layer_surface_v1)
{
return wl_proxy_get_user_data((struct wl_proxy *) zwlr_layer_surface_v1);
}
static inline uint32_t
zwlr_layer_surface_v1_get_version(struct zwlr_layer_surface_v1 *zwlr_layer_surface_v1)
{
return wl_proxy_get_version((struct wl_proxy *) zwlr_layer_surface_v1);
}
/**
* @ingroup iface_zwlr_layer_surface_v1
*
* Sets the size of the surface in surface-local coordinates. The
* compositor will display the surface centered with respect to its
* anchors.
*
* If you pass 0 for either value, the compositor will assign it and
* inform you of the assignment in the configure event. You must set your
* anchor to opposite edges in the dimensions you omit; not doing so is a
* protocol error. Both values are 0 by default.
*
* Size is double-buffered, see wl_surface.commit.
*/
static inline void
zwlr_layer_surface_v1_set_size(struct zwlr_layer_surface_v1 *zwlr_layer_surface_v1, uint32_t width, uint32_t height)
{
wl_proxy_marshal_flags((struct wl_proxy *) zwlr_layer_surface_v1,
ZWLR_LAYER_SURFACE_V1_SET_SIZE, NULL, wl_proxy_get_version((struct wl_proxy *) zwlr_layer_surface_v1), 0, width, height);
}
/**
* @ingroup iface_zwlr_layer_surface_v1
*
* Requests that the compositor anchor the surface to the specified edges
* and corners. If two orthogonal edges are specified (e.g. 'top' and
* 'left'), then the anchor point will be the intersection of the edges
* (e.g. the top left corner of the output); otherwise the anchor point
* will be centered on that edge, or in the center if none is specified.
*
* Anchor is double-buffered, see wl_surface.commit.
*/
static inline void
zwlr_layer_surface_v1_set_anchor(struct zwlr_layer_surface_v1 *zwlr_layer_surface_v1, uint32_t anchor)
{
wl_proxy_marshal_flags((struct wl_proxy *) zwlr_layer_surface_v1,
ZWLR_LAYER_SURFACE_V1_SET_ANCHOR, NULL, wl_proxy_get_version((struct wl_proxy *) zwlr_layer_surface_v1), 0, anchor);
}
/**
* @ingroup iface_zwlr_layer_surface_v1
*
* Requests that the compositor avoids occluding an area with other
* surfaces. The compositor's use of this information is
* implementation-dependent - do not assume that this region will not
* actually be occluded.
*
* A positive value is only meaningful if the surface is anchored to one
* edge or an edge and both perpendicular edges. If the surface is not
* anchored, anchored to only two perpendicular edges (a corner), anchored
* to only two parallel edges or anchored to all edges, a positive value
* will be treated the same as zero.
*
* A positive zone is the distance from the edge in surface-local
* coordinates to consider exclusive.
*
* Surfaces that do not wish to have an exclusive zone may instead specify
* how they should interact with surfaces that do. If set to zero, the
* surface indicates that it would like to be moved to avoid occluding
* surfaces with a positive exclusive zone. If set to -1, the surface
* indicates that it would not like to be moved to accommodate for other
* surfaces, and the compositor should extend it all the way to the edges
* it is anchored to.
*
* For example, a panel might set its exclusive zone to 10, so that
* maximized shell surfaces are not shown on top of it. A notification
* might set its exclusive zone to 0, so that it is moved to avoid
* occluding the panel, but shell surfaces are shown underneath it. A
* wallpaper or lock screen might set their exclusive zone to -1, so that
* they stretch below or over the panel.
*
* The default value is 0.
*
* Exclusive zone is double-buffered, see wl_surface.commit.
*/
static inline void
zwlr_layer_surface_v1_set_exclusive_zone(struct zwlr_layer_surface_v1 *zwlr_layer_surface_v1, int32_t zone)
{
wl_proxy_marshal_flags((struct wl_proxy *) zwlr_layer_surface_v1,
ZWLR_LAYER_SURFACE_V1_SET_EXCLUSIVE_ZONE, NULL, wl_proxy_get_version((struct wl_proxy *) zwlr_layer_surface_v1), 0, zone);
}
/**
* @ingroup iface_zwlr_layer_surface_v1
*
* Requests that the surface be placed some distance away from the anchor
* point on the output, in surface-local coordinates. Setting this value
* for edges you are not anchored to has no effect.
*
* The exclusive zone includes the margin.
*
* Margin is double-buffered, see wl_surface.commit.
*/
static inline void
zwlr_layer_surface_v1_set_margin(struct zwlr_layer_surface_v1 *zwlr_layer_surface_v1, int32_t top, int32_t right, int32_t bottom, int32_t left)
{
wl_proxy_marshal_flags((struct wl_proxy *) zwlr_layer_surface_v1,
ZWLR_LAYER_SURFACE_V1_SET_MARGIN, NULL, wl_proxy_get_version((struct wl_proxy *) zwlr_layer_surface_v1), 0, top, right, bottom, left);
}
/**
* @ingroup iface_zwlr_layer_surface_v1
*
* Set how keyboard events are delivered to this surface. By default,
* layer shell surfaces do not receive keyboard events; this request can
* be used to change this.
*
* This setting is inherited by child surfaces set by the get_popup
* request.
*
* Layer surfaces receive pointer, touch, and tablet events normally. If
* you do not want to receive them, set the input region on your surface
* to an empty region.
*
* Keyboard interactivity is double-buffered, see wl_surface.commit.
*/
static inline void
zwlr_layer_surface_v1_set_keyboard_interactivity(struct zwlr_layer_surface_v1 *zwlr_layer_surface_v1, uint32_t keyboard_interactivity)
{
wl_proxy_marshal_flags((struct wl_proxy *) zwlr_layer_surface_v1,
ZWLR_LAYER_SURFACE_V1_SET_KEYBOARD_INTERACTIVITY, NULL, wl_proxy_get_version((struct wl_proxy *) zwlr_layer_surface_v1), 0, keyboard_interactivity);
}
/**
* @ingroup iface_zwlr_layer_surface_v1
*
* This assigns an xdg_popup's parent to this layer_surface. This popup
* should have been created via xdg_surface::get_popup with the parent set
* to NULL, and this request must be invoked before committing the popup's
* initial state.
*
* See the documentation of xdg_popup for more details about what an
* xdg_popup is and how it is used.
*/
static inline void
zwlr_layer_surface_v1_get_popup(struct zwlr_layer_surface_v1 *zwlr_layer_surface_v1, struct xdg_popup *popup)
{
wl_proxy_marshal_flags((struct wl_proxy *) zwlr_layer_surface_v1,
ZWLR_LAYER_SURFACE_V1_GET_POPUP, NULL, wl_proxy_get_version((struct wl_proxy *) zwlr_layer_surface_v1), 0, popup);
}
/**
* @ingroup iface_zwlr_layer_surface_v1
*
* When a configure event is received, if a client commits the
* surface in response to the configure event, then the client
* must make an ack_configure request sometime before the commit
* request, passing along the serial of the configure event.
*
* If the client receives multiple configure events before it
* can respond to one, it only has to ack the last configure event.
*
* A client is not required to commit immediately after sending
* an ack_configure request - it may even ack_configure several times
* before its next surface commit.
*
* A client may send multiple ack_configure requests before committing, but
* only the last request sent before a commit indicates which configure
* event the client really is responding to.
*/
static inline void
zwlr_layer_surface_v1_ack_configure(struct zwlr_layer_surface_v1 *zwlr_layer_surface_v1, uint32_t serial)
{
wl_proxy_marshal_flags((struct wl_proxy *) zwlr_layer_surface_v1,
ZWLR_LAYER_SURFACE_V1_ACK_CONFIGURE, NULL, wl_proxy_get_version((struct wl_proxy *) zwlr_layer_surface_v1), 0, serial);
}
/**
* @ingroup iface_zwlr_layer_surface_v1
*
* This request destroys the layer surface.
*/
static inline void
zwlr_layer_surface_v1_destroy(struct zwlr_layer_surface_v1 *zwlr_layer_surface_v1)
{
wl_proxy_marshal_flags((struct wl_proxy *) zwlr_layer_surface_v1,
ZWLR_LAYER_SURFACE_V1_DESTROY, NULL, wl_proxy_get_version((struct wl_proxy *) zwlr_layer_surface_v1), WL_MARSHAL_FLAG_DESTROY);
}
/**
* @ingroup iface_zwlr_layer_surface_v1
*
* Change the layer that the surface is rendered on.
*
* Layer is double-buffered, see wl_surface.commit.
*/
static inline void
zwlr_layer_surface_v1_set_layer(struct zwlr_layer_surface_v1 *zwlr_layer_surface_v1, uint32_t layer)
{
wl_proxy_marshal_flags((struct wl_proxy *) zwlr_layer_surface_v1,
ZWLR_LAYER_SURFACE_V1_SET_LAYER, NULL, wl_proxy_get_version((struct wl_proxy *) zwlr_layer_surface_v1), 0, layer);
}
/**
* @ingroup iface_zwlr_layer_surface_v1
*
* Requests an edge for the exclusive zone to apply. The exclusive
* edge will be automatically deduced from anchor points when possible,
* but when the surface is anchored to a corner, it will be necessary
* to set it explicitly to disambiguate, as it is not possible to deduce
* which one of the two corner edges should be used.
*
* The edge must be one the surface is anchored to, otherwise the
* invalid_exclusive_edge protocol error will be raised.
*/
static inline void
zwlr_layer_surface_v1_set_exclusive_edge(struct zwlr_layer_surface_v1 *zwlr_layer_surface_v1, uint32_t edge)
{
wl_proxy_marshal_flags((struct wl_proxy *) zwlr_layer_surface_v1,
ZWLR_LAYER_SURFACE_V1_SET_EXCLUSIVE_EDGE, NULL, wl_proxy_get_version((struct wl_proxy *) zwlr_layer_surface_v1), 0, edge);
}
#ifdef __cplusplus
}
#endif
#endif